Wooden Gate Door Latch
video

Wooden Gate Door Latch

Product information Exhibit wooden gate door latch
Product Model No: SKN1906-W
Size: 8-7/8"×4"
Material: Carbon steel/SS304
Fit for: Wooden gate /vinyl gate The latch is crafted from durable and resilient material, standing strong against deformation and breakage in daily use. Its...
Send Inquiry
Product Introduction
img-1-1
 
 

Product information

Exhibit
 
product-1000-1000
wooden gate door latch
Product
 
Model No:
SKN1906-W
Size:
8-7/8"×4"
Material:
Carbon steel/SS304
Fit for:
Wooden gate /vinyl gate

 

The Wooden Gate Door Latch (Model GH1156) produced by SKYSEN is specially designed for wooden doors and vinyl doors, with dimensions of 8-7/8"×4". Its structure is simple and practical, consisting of a strike plate, a latch bar, a door handle, and matching screws. It is easy to install and can be quickly completed with only a few tools. It can also be installed on either side of the door according to personal preference. Made of carbon steel/SS304, it is sturdy and durable, capable of effectively resisting deformation and damage during daily use. The product features weather resistance, UV protection, and environmental friendliness. The coating can isolate external moisture and light, extend the service life, and is not easily damaged. Even if damaged, it will not release harmful substances to pollute the environment. It can provide reliable locking protection for your gate regardless of the location.

  • product-1000-1000
    Corrosive Resilience

    The material has greatly improved, particularly in corrosion resistance, with carbon steel and stainless steel excelling in this aspect. The coating enhances isolation against humidity and light, slowing down aging and extending the material's lifespan. It prevents rain accumulation, reducing the likelihood of rust.

  • product-1000-1000
    Quick setup

    It has been simplified, comprised primarily of the strike plate, latch bar, door handle, and matching screws. This simplifies the mounting process, reduces difficulty, and does not require an excessive amount of tools or time to quickly install. It can be mounted on either side, accommodating personal preferences.

  • product-1000-1000
    Effortless Functioning

    It can be used without pressing, and the clever design of the strike plate and latch allows it to close more smoothly and reduces friction between them. This not only makes it more convenient for the user but also reduces the influence on the overall impression.

  • product-1000-1000
    Weather-resilient

    The hardness, elasticity, and ductility of the raw material make the main body and handle resistant to various external forces such as wind and rain, and not easily deformed and broken. The coating can play a protective role, isolate external dampness and light, and extend the life of the product.

  • product-1000-1000
    UV defense

    The coating on the latch's exterior plays a key role in isolating external wetness and light, minimizing damage to the internal material. This, in turn, slows down the aging and embrittlement rate, ultimately extending the service life.

  • product-1000-1000
    Eco-conscious

    To reduce the environmental impact, we are constantly improving our production processes and raw material selection. The coating is not easily damaged during use. Even if damaged, it will not release harmful substances and pollute the environment.

Product Advantages and Features

 

Advantage Features

Detailed Description

Strong Corrosion Resistance

Made of carbon steel and stainless steel, it excels in corrosion resistance. The coating enhances the isolation of moisture and light, slowing down the aging rate of the material and extending its service life. Tested to be placed in a humid environment for 1000 hours, the corrosion rate is less than 1%.

Good UV Resistance

The external coating plays a key role in isolating external moisture and light, which can minimize damage to internal materials. Tested to be used under UV irradiation for 3 years, the aging and embrittlement rate is reduced by 30%.

Environmentally Friendly

The factory continuously improves production processes and raw material selection. The coating is not easily damaged during use, and even if damaged, it will not release harmful substances to pollute the environment. It meets environmental standards, and the detection shows that the release of harmful substances is zero.

 

 

Product Testing

 

To ensure product quality and performance, SKYSEN has conducted a variety of rigorous tests on the Wooden Gate Door Latch. In the corrosion resistance test, the product was placed in a simulated marine high-salt fog environment for 1000 hours. The results showed that its corrosion rate was less than 1%, far below the industry average, proving that it can still maintain good performance in harsh environments such as humidity and high salt. In terms of extreme weather testing, by simulating different climatic conditions such as high temperature, low temperature, wind and rain, the product was used continuously in these environments for 5 years. The test results showed that its performance degradation did not exceed 5%, and it can adapt to various complex outdoor climates.

 

Product Material Analysis

 

The product uses carbon steel/SS304 stainless steel as the main material. Carbon steel has high strength and hardness, which can provide a stable structural support for the product and make it not easily deformed or damaged when subjected to external forces. SS304 stainless steel has excellent corrosion resistance, especially in humid and salty environments, which can effectively resist rust and extend the service life of the product. The surface coating is treated with advanced technology, which not only enhances the isolation effect of moisture and light, but also further improves the corrosion resistance and UV resistance of the product. This coating is not easily damaged during use, and even if slightly damaged, it will not release harmful substances, ensuring the environmental performance of the product. Through careful selection and treatment of materials, SKYSEN's Wooden Gate Door Latch performs well in terms of strength, corrosion resistance, weather resistance, etc., and can meet the needs of various outdoor use scenarios.

 

Application Fields (Taking Horse Farms as an Example)

 

Horse farm: The gate of a horse farm needs to be opened and closed frequently, and is often subjected to collisions and external forces from horses. The Wooden Gate Door Latch of SKYSEN is made of strong carbon steel and SS304 stainless steel, which can withstand the impact of horses and is not easily deformed or damaged. Its corrosion resistance can cope with the corrosive environment such as humidity and feces in horse farms, ensuring the long-term stable use of the latch. It is easy to install and can be installed quickly without affecting the normal operation of the horse farm.

 

Why Choose SKYSEN?

 

As a leading manufacturer of fence gate hardware in China, SKYSEN has rich experience and professional knowledge in the industry. The company has always adhered to the use of environmentally friendly materials, which is in line with contemporary sustainable development goals and has attracted many customers with strong environmental awareness. In terms of quality control, SKYSEN implements strict measures to ensure that products meet or exceed industry standards and provide customers with high-quality products. At the same time, the company is familiar with international standards and can ensure that products meet international requirements, facilitating cross-border transactions. In addition, SKYSEN has invested in advanced production equipment, which can produce high-quality and technologically advanced products to meet the diverse needs of customers. By choosing SKYSEN, you will get high-quality products, professional services and reliable guarantees.

 

Contact now

Send Inquiry

whatsapp

Phone

E-mail

Inquiry