Gate Latch On Vinyl Siding
Exhibit gate latch on vinyl siding
Product Model No: SKN1906-W
Size: 8-7/8”×4”
Material: Carbon steel/SS304
Fit for: Wooden gate /vinyl gate
Introducing our latest innovation, the gate latch on vinyl siding! Designed to enhance and streamline the function and style of your gate,...
Product information

SKYSEN stainless steel vinyl siding latch is designed for high-strength outdoor scenes. The main body is made of 316 stainless steel (containing 2% molybdenum), which has a 50% higher resistance to chloride ion corrosion. The innovative dual-axis linkage structure supports 500 pounds of vertical load, and is equipped with shock-proof gaskets to reduce the opening and closing noise to less than 30 decibels. The snap-on installation is compatible with 4-6 inch door frame thickness, the applicable temperature range is -40℃~120℃, and it has passed the ISO 9227 salt spray test for 2000 hours without rust.
As a professional fence accessories supplier, SKYSEN provides military-grade protection solutions for horse farms, swimming pool fences, etc.
【Full Set of Accessories】Purchasing this Gate Latch On Vinyl Siding provides all the components you need to install a gate on a wooden or PVC fence, no need to purchase separately.
【Gravity Self-Latching Latch】Our gate hardware kit is made of heavy-duty steel, and the protective outdoor self-closing latch has an advanced black powder coating and zinc plating for corrosion resistance. Designed for left-handed and right-handed use, it features a fingertip self-locking mechanism and can also be operated by a pull cord.
【Safe and Sturdy Construction】The heavy-duty latch weighs approximately 1.76 pounds (760 grams) and is designed to provide simple and sturdy security for swing gates and doors that open inwards and outwards. Equipped with a 90-degree bracket to ensure a secure connection between the locks between the doors, and is compatible with standard padlocks or pin locks for enhanced security (padlocks and pins are not included in the kit).
Products Description
-
Super corrosion resistance316 stainless steel material has 40% higher corrosion resistance than 304 stainless steel in salty and humid environment, and its life span reaches 15 years+ in the environment of horse farm detergent spraying.
-
Extreme load-bearing structureFour-way load-bearing bearing design, the measured load-bearing exceeds 227kg (500lbs), which exceeds the industry standard by 200%.
-
Intelligent anti-freeze lockThe opening and closing smoothness remains 98% in the -30℃ low temperature test, solving the problem of gate freezing in extremely cold areas.
-
Zero maintenance designThe self-lubricating shaft core runs maintenance-free for 100,000 times, and the maintenance cost is reduced by 70% compared with iron bolts.
-
Anti-UV agingThe surface nano-ceramic coating has no color change after 3000 hours of QUV accelerated aging test, and is suitable for strong ultraviolet areas in swimming pools.
-
Silent upgradeThe hydraulic buffer module controls the impact noise to 28dB (library environment level), which is suitable for residential fences.
Important properties
|
Material |
Stainless steel |
Warranty service |
1 year |
|
Engineering solution capability |
3D modeling design |
Thickness |
3mm, 2mm |
|
Features |
Soft closing, adjustable, easy to install |
Opening angle |
180 degrees |
|
Design style |
Modern |
Application scenario |
Yard |
|
After-sales service |
Online technical support |
Bearing |
Pair |
|
Variety |
PVC fence gate hardware |
Model |
JL1906 |
|
Origin |
Zhejiang, China |
Brand |
OEM |
|
Product name |
Wooden door self-closing latch |
Material |
Iron |
|
Color |
White, black, zinc, zinc + black, galvanized |
Packing |
Bag + Carton + Pallet |
|
Sample |
Free of charge |
OEM |
Accept |
|
Finish |
Powder coating |
Trade terms |
EXW,FOB,CIF,CNF |
|
Lead time |
10 - 15 |
Minimum order quantity |
50 sets |
Products Description

Professional test report
SKYSEN latch passed six-dimensional industrial-grade verification:
Salt spray corrosion test: According to ASTM B117 standard, it lasted for 2000 hours (equivalent to 20 years in coastal environment), and there was no pitting or cracks on the surface
Dynamic fatigue test: After 100,000 mechanical opening and closing cycles, the structural deformation was less than 0.2mm, and the spring tension attenuation rate was ≤3%
Extreme temperature change test: -40℃ freezing for 12 hours → 120℃ baking shock, repeated 50 times, the component gap change was within the tolerance range
Chemical tolerance test: Soaked in pH2~12 acid and alkali solution (simulated pesticide/swimming pool chlorine water) for 72 hours, the material weight loss rate was less than 0.01g/cm²
Wind pressure test: Maintain structural integrity in a 50m/s wind tunnel environment (12-level typhoon level)
VOC environmental protection test: Passed REACH SVHC 219 harmful substances screening and met the EU outdoor product access standards
In-depth analysis of 6 major application scenarios
|
Scenes |
Pain points |
SKYSEN solution |
Data advantages |
|
Racetrack fence |
Horse impact force reaches 800N |
Reinforced impact absorption structure |
Passed 2000J impact test (EN ISO 148) |
|
Swimming pool fence |
Chlorine spray corrosion |
316 stainless steel + sealed bearing |
Chloride ion tolerance increased to 5000ppm |
|
Farm corral |
Fertilizer/manure corrosion |
Overall electrolytic polishing without gaps |
Chemical corrosion rate reduced by 90% |
|
Beach house |
Salt spray erosion causes jamming |
Molybdenum alloy anti-salt spray design |
Opening and closing force still <5N after 2000hrs salt spray test |
|
Ski resort fence |
-40℃ low temperature embrittlement |
Low-temperature special stainless steel formula |
-50℃ Charpy impact energy value remains 27J |
|
Industrial park |
High frequency use causes wear |
Tungsten carbide core shaft |
Wear resistance index reaches HRC72, life span 10 years+ |
Why choose SKYSEN?
We have been engaged in outdoor hardware manufacturing for 17 years and serve B-end customers in 23 countries around the world. Our own CNC factory achieves ±0.01mm tolerance control, and the raw materials are directly sourced from POSCO 316L stainless steel coils. We have passed BSI ISO 9001/14001 dual certification and provide 15-year warranty. We support OEM/ODM customization, 72-hour proofing and delivery, and direct shipment from US/EU warehouses.
FAQ
Q: Does it support customization of ultra-wide door bodies?
A: The factory supports non-standard customization, and can produce industrial-grade door latches that are compatible with 8-inch door frames at most. Engineering drawings will be provided for confirmation within 48 hours.
Q: Will it fail under extreme temperature differences?
A: The supply chain uses aviation-grade materials. The change in opening and closing resistance in the -40℃~120℃ temperature difference test is less than 15%. Alaska oil field customers have verified that there are no faults for three years.
Q: What are the core advantages of zinc alloy products?
A: The supplier's material laboratory data shows that the tensile strength of 316 stainless steel (620MPa) is 2.6 times that of zinc alloy (240MPa), eliminating the risk of breakage.
Q: What is the delivery cycle for bulk purchases?
A: The manufacturer's US warehouse has 5,000 sets of inventory, and a minimum order of 100 sets can be delivered within 7 days, supporting the VMI supply chain management model.
Previous
Vinyl Fence Locking LatchNext
PVC Gate LatchYou Might Also Like
Send Inquiry

















